The Fusion Steam Machine

0

A Fusion Reactor for Today

In this article I will present a nuclear fusion power plant which is instantly buildable with todays technology, which is much safer than any of todays working nuclear power reactors, which provides enough hot steam for electric power within the GW range, which provides at least 95% fusion energy, which has a 7.5 times higher fuel efficiency than todays fission reactors and consumes totally at least less than 1/150 of natural uranium than nuclear energy production today, which produces no nuclear waste to be removed, which uses raw natural uranium-238 and ordinary ocean water as basic materials for energy production, which breedes and produces it own nuclear fission and fusion fuels within the plant, which costs less than any of todays nuclear energy plants, which can provide electric energy for less than 5 Cent/kWh for the end consumer.

_MG_0830

Weiterlesen

Advertisements

The Nomad Fusion Reactor

9

A Revised Version of the Thermonuclear Fusion Steam Machine

This article presents the proposal for new fusion power plants made exclusive of existing technology, how they work and how they are built in detail and that they work. The latter is proven by means of basically thermodynamic considerations. Also, the text proves the safety and ecologic cleanness of the plants. It shows in detail how to build them economically, of course by apparently unusual and violent means, and it takes some getting used to. The electric energy they deliver on Earth will be cheaper than any form of electric energy before, although they are built on the Moon. In this case it is because they are built on the Moon. Fusion energy is available.

Fusion Energy is available for about 60 years now since the first thermonuclear bomb was ignited on Nov 1, 1952. But where are the power plants? And which size will they have? Notice the little man standing in front of ITER. Where’s the steam turbine and the electric power generator in the drawing of DEMO? Fig: [2]

Weiterlesen

The Four Stroke Thermonuclear Motor

2

– proposal for a fusion energy plant of GW size buildable at present: a fusion bomb steam machine

[This is the older and original version of the thermonuclear fusion steam machine. The article describes in detail, how I got the idea, and why I was sure, that it could work. But there was still a thermodynamic trap in the approach, and after some years the plant would have suffered the heat death. I did a change in the geometry and size to avoid this problem. Please refer to the newest version: „The Nomad Fusion Reactor“]

Scientists all over the world, experts for Nuclear Physics and Plasma Physics, are working today on Billion Dollars expensive experimental devices [1][2][3][3a] to make Fusion Energy available to mankind. They are developing their giant plants for about 40 years [3] now, but they are not much further (in producing energy) than hobbyists that are building small electrodynamic fusion energy devices in their cellars for a few thousand dollars [4]. Both, the big and the small devices, turn out a nuclear fusion reaction, and both have the same problem: they don’t produce energy. Of course there is energy from the fusion reaction, but in both cases it is much less than the fusion reactor consumes itself. So the scientific reports periodically released are very depressive to read. There is also an illustrious scientific work, a dissertation, that circulates for 17 years, which calculates, that both kinds – the big and the small – of continuous fusion reactors will never work, both because of the same reasons [5].

Fusion Energy is available for about 60 years now since the first thermonuclear bomb was ignited on Nov 1, 1952. But where are the power plants? And which size will they have? Notice the little man standing in front of ITER. Where’s the steam turbine and the electric power generator in the drawing of DEMO? Fig: [5a]

Weiterlesen